Monolithic ZrB2 and TaB2 were produced starting from the precursors through Self-propagating High temperature Synthesis followed by Spark Plasma Sintering (SHS-SPS) and by means of Reactive Spark Plasma Sintering (RSPS). Both methods enabled to achieve almost fully dense ceramics with mean grain size typical of pure bulks. ZrB2 materials displayed significant differences in the final mean grain size of the products obtained by the two routes, while a satisfactory homogeneity was reached in both cases. This was confirmed by good mechanical strength values, about 400 MPa at room temperature, basically maintained up to 1200°C. On the other hand, TaB2 sintered materials were quite diverse, in particular TaB2/RSPS showed a dual distribution of mean grain size, along with an almost no residual porosity, whilst TaB2/SHS-SPS had more homogeneous grain size distribution and diffused trapped porosity which corrupted the mechanical and oxidation performances.

Bulk monolithic zirconium and tantalum diborides by reactive and non-reactive spark plasma sintering

LICHERI, ROBERTA;MUSA, CLARA;ORRU', ROBERTO;CAO, GIACOMO;
2016-01-01

Abstract

Monolithic ZrB2 and TaB2 were produced starting from the precursors through Self-propagating High temperature Synthesis followed by Spark Plasma Sintering (SHS-SPS) and by means of Reactive Spark Plasma Sintering (RSPS). Both methods enabled to achieve almost fully dense ceramics with mean grain size typical of pure bulks. ZrB2 materials displayed significant differences in the final mean grain size of the products obtained by the two routes, while a satisfactory homogeneity was reached in both cases. This was confirmed by good mechanical strength values, about 400 MPa at room temperature, basically maintained up to 1200°C. On the other hand, TaB2 sintered materials were quite diverse, in particular TaB2/RSPS showed a dual distribution of mean grain size, along with an almost no residual porosity, whilst TaB2/SHS-SPS had more homogeneous grain size distribution and diffused trapped porosity which corrupted the mechanical and oxidation performances.
2016
Diborides; Mechanical properties; Self-propagating high temperature synthesis; Spark plasma sintering; Ultra-high temperature ceramics; Mechanical Engineering; Mechanics of Materials; Materials Chemistry; Metals and Alloys
File in questo prodotto:
File Dimensione Formato  
Licheri_et_al_ZrB2&TaB2_JALCOM_2016.pdf

Solo gestori archivio

Descrizione: Versione pubblicata
Tipologia: versione editoriale
Dimensione 2.01 MB
Formato Adobe PDF
2.01 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11584/143242
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 53
  • ???jsp.display-item.citation.isi??? 47
social impact