This chapter focuses on the design of the treated a system that combines three subsystems: the data acquisition section, which samples the analog signals and converts them into a digital form; the digital signal processor, where the measurement procedures are implemented; and the synchronization system, which provides the common time reference. The analysis explores different possible technologies and explains to what extent each single part may contribute to the overall measurement uncertainty. The second focus of this chapter is the insertion of the PMU in a distributed measurement system. Here the main aspects of the communication system are analyzed from both a hardware and a software point of view. Finally, the possibility of implementing a distributed PMU in an electrical substation is also explored, where the PMU subsystems are physically separated between each other, but may work together by sharing the data through a suitable communication infrastructure.
Scheda prodotto non validato
Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo
|Titolo:||Hardware for PMU and PMU Integration|
|Data di pubblicazione:||2016|
|Tipologia:||2.1 Contributo in volume (Capitolo o Saggio)|