Spark Plasma Sintering (SPS) represents a very attractive technique for the obtainment of dense materials including nanostructured ones. SPS basically consists in the simultaneous application of a pulsed DC current and an uniaxial mechanical load through a powder compact. Other than providing rapid Joule heating and likely enhancing mass transport through electromigration, the imposed pulsed high current is also reported to generate a plasma within the voids surrounding the powder particles, thus facilitating the removal of oxides surface layers that may hinder the sintering process. Selected results obtained through SPS in our laboratory for the preparation of a wide variety of materials, i.e. TiC-TiB2, MgB2, and NbAl3, will be presented in this work. Specifically, all the chosen examples are related to the use of the SPS technique for obtaining the desired material by simultaneously performing synthesis and consolidation stages in one-step.

Spark Plasma Synthesis/Sintering of Dense Ceramic, Intermetallic and Composite Materials

LOCCI, ANTONIO MARIO;LICHERI, ROBERTA;ORRU', ROBERTO;CINCOTTI, ALBERTO;CAO, GIACOMO
2006-01-01

Abstract

Spark Plasma Sintering (SPS) represents a very attractive technique for the obtainment of dense materials including nanostructured ones. SPS basically consists in the simultaneous application of a pulsed DC current and an uniaxial mechanical load through a powder compact. Other than providing rapid Joule heating and likely enhancing mass transport through electromigration, the imposed pulsed high current is also reported to generate a plasma within the voids surrounding the powder particles, thus facilitating the removal of oxides surface layers that may hinder the sintering process. Selected results obtained through SPS in our laboratory for the preparation of a wide variety of materials, i.e. TiC-TiB2, MgB2, and NbAl3, will be presented in this work. Specifically, all the chosen examples are related to the use of the SPS technique for obtaining the desired material by simultaneously performing synthesis and consolidation stages in one-step.
2006
978-3-908158-01-1
Ceramic; Composite; Densification; Intermetallic; Spark Plasma Sintering (SPS); Synthesis
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11584/21776
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact