SOFC-MGT hybrid power plants are based on the integration of a solid oxide fuel cell and a micro-gas turbine and can achieve efficiencies of over 60% even for small power outputs (200-500 kW). The SOFC-MGT systems currently developed are fuelled with natural gas, which is reformed inside the same stack, but the use of alternative fuels can be an interesting option. In particular, as the reforming temperature of methanol and DME (200-350 °C) is significantly lower than that of natural gas (700-900 °C) the reformer can be sited even outside the stack. External reforming in SOFC-MGT plants fuelled by methanol and DME enhances efficiency on account of improved exhaust heat recovery and of the higher voltage produced by the greater hydrogen partial pressure at the anode inlet. The study carried out in this paper shows that the main operating parameters of the fuel reforming section (temperature and steam-to-carbon ratio, SCR) must be carefully chosen in order to optimise the hybrid plant performance. For the stoichiometric SCR values, the optimum reforming temperature for the methanol fuelled hybrid plant is around 240 °C, giving efficiencies of about 67-68% with a SOFC temperature of 900 °C (the efficiency is about 72-73% at 1000 °C). Similarly, for DME the optimum reforming temperature is around 280 °C with efficiencies of about 65% at 900 °C (69% at 1000 °C). Higher SCRs impair stack performance. As too small SCRs can lead to carbon formation, practical SCR values are around 1 for methanol and 1.5-2 for DME

Externally reformed SOFC-MGT hybrid systems fuelled by methanol and DME

COCCO, DANIELE;TOLA, VITTORIO
2007-01-01

Abstract

SOFC-MGT hybrid power plants are based on the integration of a solid oxide fuel cell and a micro-gas turbine and can achieve efficiencies of over 60% even for small power outputs (200-500 kW). The SOFC-MGT systems currently developed are fuelled with natural gas, which is reformed inside the same stack, but the use of alternative fuels can be an interesting option. In particular, as the reforming temperature of methanol and DME (200-350 °C) is significantly lower than that of natural gas (700-900 °C) the reformer can be sited even outside the stack. External reforming in SOFC-MGT plants fuelled by methanol and DME enhances efficiency on account of improved exhaust heat recovery and of the higher voltage produced by the greater hydrogen partial pressure at the anode inlet. The study carried out in this paper shows that the main operating parameters of the fuel reforming section (temperature and steam-to-carbon ratio, SCR) must be carefully chosen in order to optimise the hybrid plant performance. For the stoichiometric SCR values, the optimum reforming temperature for the methanol fuelled hybrid plant is around 240 °C, giving efficiencies of about 67-68% with a SOFC temperature of 900 °C (the efficiency is about 72-73% at 1000 °C). Similarly, for DME the optimum reforming temperature is around 280 °C with efficiencies of about 65% at 900 °C (69% at 1000 °C). Higher SCRs impair stack performance. As too small SCRs can lead to carbon formation, practical SCR values are around 1 for methanol and 1.5-2 for DME
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11584/109360
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? ND
social impact