The Furtei gold mine in Sardinia (Italy) exploits a volcanic-hosted high-sulphidation epithermal deposit. Large amounts of materials derived from exploitation are present in open pits, waste rock dumps and cyanidation tailings impoundment. Mineralized rocks in outcrops and waste dumps contain significant amounts of sulphides (mainly pyrite and enargite). These materials have a high potential for acid drainage generation and release of toxic elements (notably Cu and As, but also Al, Ni, Co and Cd) as pointed out by laboratory leaching tests and in agreement with chemical composition of waters draining the mining area, that show pH as low as 2, up to 180 mg/L Cu, up to 5 mg/L As, and up to 788 mg/L Al. On the other hand, leaching solutions and waters interacting with mineral assemblages of the propylitic alteration zone (mainly composed of chlorite, quartz, and calcite, with relic magmatic plagioclase) show higher pH, and lower metal loads. Leachates from cyanidation tailings show variable pH (between 6.2 and 9.7, depending on sulphide content in tailings); cyanide concentration varies between 110 pg/L and about 3 mg/L, whereas contents of toxic elements in leachates are, with the exception of Hg. within the limits of Italian regulations for non-dangerous industrial wastes. Reclamation plans provide for confinement of tailings within specific repositories. This measure should effectively reduce the environmental impact of these materials. Reclamation plans should also include an adequate management of other high-sulphide wastes.
Release of toxic elements from rocks and mine wastes at the Furtei gold mine (Sardinia, Italy)
DA PELO, STEFANIA;CIDU, ROSA;FRAU, FRANCO;LATTANZI, PIERFRANCO
2009-01-01
Abstract
The Furtei gold mine in Sardinia (Italy) exploits a volcanic-hosted high-sulphidation epithermal deposit. Large amounts of materials derived from exploitation are present in open pits, waste rock dumps and cyanidation tailings impoundment. Mineralized rocks in outcrops and waste dumps contain significant amounts of sulphides (mainly pyrite and enargite). These materials have a high potential for acid drainage generation and release of toxic elements (notably Cu and As, but also Al, Ni, Co and Cd) as pointed out by laboratory leaching tests and in agreement with chemical composition of waters draining the mining area, that show pH as low as 2, up to 180 mg/L Cu, up to 5 mg/L As, and up to 788 mg/L Al. On the other hand, leaching solutions and waters interacting with mineral assemblages of the propylitic alteration zone (mainly composed of chlorite, quartz, and calcite, with relic magmatic plagioclase) show higher pH, and lower metal loads. Leachates from cyanidation tailings show variable pH (between 6.2 and 9.7, depending on sulphide content in tailings); cyanide concentration varies between 110 pg/L and about 3 mg/L, whereas contents of toxic elements in leachates are, with the exception of Hg. within the limits of Italian regulations for non-dangerous industrial wastes. Reclamation plans provide for confinement of tailings within specific repositories. This measure should effectively reduce the environmental impact of these materials. Reclamation plans should also include an adequate management of other high-sulphide wastes.I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.