Assembled systems composed of flexible components are widely used in mechanics to dampen vibrations and store or dissipate energy. Often, the flexible components of these systems are assembled via non-linear sliding contacts and yielding constraints. Geometric non-linearity along with non-linearity of stiffness, damping and contact pressure between flexible components greatly complicate the dynamic characterization of these assemblies. Therefore, such assemblies are characterised almost exclusively by means of experimental testing. This research analyses how classic ASME and ISO tolerance standards can be used to guarantee and control the conformity of these assembled systems with their functional requirements limiting the number of experimental tests. In particular the dependence of the dynamic behaviour upon functional tolerances is studied for a mechanical tensioner in a chain drive timing system of an internal combustion engine (ICE). The semi empirical methodology is based on displacement measurements and modal analyses. A multibody model with few degrees of freedom (MBM-FDoF) is proposed as the first approximation to reproduce the variability of the dynamic behaviour of the tensioner considering variations in functional tolerances.

An integrated approach to characterize the dynamic behaviour of a mechanical chain tensioner by functional tolerancing

Ambu, Rita;
2018-01-01

Abstract

Assembled systems composed of flexible components are widely used in mechanics to dampen vibrations and store or dissipate energy. Often, the flexible components of these systems are assembled via non-linear sliding contacts and yielding constraints. Geometric non-linearity along with non-linearity of stiffness, damping and contact pressure between flexible components greatly complicate the dynamic characterization of these assemblies. Therefore, such assemblies are characterised almost exclusively by means of experimental testing. This research analyses how classic ASME and ISO tolerance standards can be used to guarantee and control the conformity of these assembled systems with their functional requirements limiting the number of experimental tests. In particular the dependence of the dynamic behaviour upon functional tolerances is studied for a mechanical tensioner in a chain drive timing system of an internal combustion engine (ICE). The semi empirical methodology is based on displacement measurements and modal analyses. A multibody model with few degrees of freedom (MBM-FDoF) is proposed as the first approximation to reproduce the variability of the dynamic behaviour of the tensioner considering variations in functional tolerances.
2018
ASME-ISO tolerance specification; Deformation energy; Multibody model; Reverse engineering; Tensioner; Mechanics of Materials; Mechanical Engineering
File in questo prodotto:
File Dimensione Formato  
An integrated approach to characterize the dinamic behaviour of a mechanical chain tensioner by functional tolerancing.pdf

Solo gestori archivio

Tipologia: versione editoriale
Dimensione 3.63 MB
Formato Adobe PDF
3.63 MB Adobe PDF   Visualizza/Apri   Richiedi una copia

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11584/247775
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 17
  • ???jsp.display-item.citation.isi??? 12
social impact