This paper reports the performances of a silicon photonics optical switch matrix fabricated by using large scale 3D integration. The wavelength selective optical switch consists of a photonic integrated circuit (PIC), with 1398 circuit elements, interconnected in a 3D stack with its control electronic integrated circuit (EIC). Each PIC element can be trimmed or reconfigured by using metallic heaters. The EIC is designed to drive the heaters and to read the signal of monitor photodiodes integrated into the PIC. Small footprint and high energy efficiency are achieved in the PIC and the EIC. Automatic wavelength alignment of the optical circuits in the PIC to the ITU grid and fine temperature tuning of each photonic element to optimize the switch insertion losses are obtained by an optimization routine. A fully packaged switch with input/output fibers is tested both for optical and electrical characteristics as well as for the system performances. Fiber to fiber insertion losses of about 20 dB and channel isolation of -35 dB are achieved. BER characteristics at 25 Gbps are evaluated. Perspective applications of the optical switch in optical transport and intra-data center networks are discussed.

Integrated Reconfigurable Silicon Photonics Switch Matrix in IRIS Project: Technological Achievements and Experimental Results

Pintus, Paolo;
2019-01-01

Abstract

This paper reports the performances of a silicon photonics optical switch matrix fabricated by using large scale 3D integration. The wavelength selective optical switch consists of a photonic integrated circuit (PIC), with 1398 circuit elements, interconnected in a 3D stack with its control electronic integrated circuit (EIC). Each PIC element can be trimmed or reconfigured by using metallic heaters. The EIC is designed to drive the heaters and to read the signal of monitor photodiodes integrated into the PIC. Small footprint and high energy efficiency are achieved in the PIC and the EIC. Automatic wavelength alignment of the optical circuits in the PIC to the ITU grid and fine temperature tuning of each photonic element to optimize the switch insertion losses are obtained by an optimization routine. A fully packaged switch with input/output fibers is tested both for optical and electrical characteristics as well as for the system performances. Fiber to fiber insertion losses of about 20 dB and channel isolation of -35 dB are achieved. BER characteristics at 25 Gbps are evaluated. Perspective applications of the optical switch in optical transport and intra-data center networks are discussed.
2019
3-D photonic-electronic integration
Arrayed waveguide gratings
colorless
directionless and contentionless (CDC) reconfigurable add and drop multiplexers (ROADM)
integrated optical circuits
micro-ring resonator switch element
Optical device fabrication
Optical fibers
Optical switches
optical switches
photonic system-on-chip
Photonics
Switching circuits
Atomic and Molecular Physics
and Optics
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11584/345700
 Attenzione

Attenzione! I dati visualizzati non sono stati sottoposti a validazione da parte dell'ateneo

Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 17
  • ???jsp.display-item.citation.isi??? 13
social impact