In this study, carbon screen-printed electrodes (SPEs) modified with gold nanoparticles (AuNPs), were prepared for label-free detection of Escherichia coli(E. coli) O157. AuNPs were synthesized by an electrochemical method and then modified on the carbon SPEs to improve the stability and effectiveness of the biosensor. Anti-E. coli O157 antibody was immobilized on the modified SPEs via -NHS cross-linking. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were selected to investigate electrochemical properties of modified carbon SPEs in a 5.0 mM K3[Fe(CN)6]/ K4[Fe(CN)6] added with 0.1 M KCl as well as to detect E. coli O157 bacteria. Results showed that the carbon SPEs were successfully modified with AuNPs of 18.0 ± 1.6 nm. The electrochemical signal of modified SPEs was stable after CV cycles, and the charge transfer resistance (Rct) decreased approximately to half of its initial value. Importantly, electrochemical biosensors based on AuNPs-modified carbon SPEs could detect E. coli O157 in the range of 10–106 CFU/mL without labels. The limit of detection was found at 15 CFU/mL with a signal-to-noise ratio of 3:1, and the time of detection was about 30 min. The success of as-prepared biosensor could open a strategy of portable diagnostics for label-free and quick detection of bacterial pathogens causing food-borne diseases, hospital-acquired infections as well as the emerging and re-emerging infectious diseases.

A label-free electrochemical biosensor based on screen-printed electrodes modified with gold nanoparticles for quick detection of bacterial pathogens

Tonezzer M;
2021-01-01

Abstract

In this study, carbon screen-printed electrodes (SPEs) modified with gold nanoparticles (AuNPs), were prepared for label-free detection of Escherichia coli(E. coli) O157. AuNPs were synthesized by an electrochemical method and then modified on the carbon SPEs to improve the stability and effectiveness of the biosensor. Anti-E. coli O157 antibody was immobilized on the modified SPEs via -NHS cross-linking. Cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) were selected to investigate electrochemical properties of modified carbon SPEs in a 5.0 mM K3[Fe(CN)6]/ K4[Fe(CN)6] added with 0.1 M KCl as well as to detect E. coli O157 bacteria. Results showed that the carbon SPEs were successfully modified with AuNPs of 18.0 ± 1.6 nm. The electrochemical signal of modified SPEs was stable after CV cycles, and the charge transfer resistance (Rct) decreased approximately to half of its initial value. Importantly, electrochemical biosensors based on AuNPs-modified carbon SPEs could detect E. coli O157 in the range of 10–106 CFU/mL without labels. The limit of detection was found at 15 CFU/mL with a signal-to-noise ratio of 3:1, and the time of detection was about 30 min. The success of as-prepared biosensor could open a strategy of portable diagnostics for label-free and quick detection of bacterial pathogens causing food-borne diseases, hospital-acquired infections as well as the emerging and re-emerging infectious diseases.
2021
Carbon screen-printed electrode; Electrochemical biosensor; Escherichia coli O157 bacteria; Gold nanoparticle; Label-free detection
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S2352492820327379-main.pdf

Solo gestori archivio

Descrizione: Articolo principale
Tipologia: versione editoriale (VoR)
Dimensione 4.24 MB
Formato Adobe PDF
4.24 MB Adobe PDF   Visualizza/Apri   Richiedi una copia
2-A-label-free-Pre-proof.pdf

accesso aperto

Descrizione: Articolo principale
Tipologia: versione pre-print
Dimensione 1.13 MB
Formato Adobe PDF
1.13 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11584/351721
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 76
  • ???jsp.display-item.citation.isi??? 63
social impact